 |
|
|
|
|
|
$19.95 |
Beaver Floatplane 1/48
Plastic Model Kit
Now
you can build your own version of the Beaver, one
of the world's most widely used utility and bush flying
airplane. Detailed plastic kit of the floatplane variant.
Features include precise moldings, realistic appearance
and a choice of markings. 111/2" wingspan when
complete. |
|
Sorry
Out of Stock
$10.95 |
Ford Flivver 1/48 Plastic
Model Kit
Henry Ford's
experimental "personal" airplane was flown
by only two men; in 1926 by Test Pilot Harry Brooks
and in 1927 by Charles A. Lindbergh. Though the original
Flivver is on display at the Ford Museum, you can
build your own version with this plastic kit. Airplane
has a 51/2" wingspan; assembly required. |
|
$29.95 |
Boeing F4B-4 1/48 Plastic
Model Kit
The Boeing
F4B-4 first entered service during 1932, and it flew
in a variety of roles until 1942. It was beloved by
all pilots that flew it, a true immortal of U.S. aviation.
Highly detailed plastic and resin kit features delicately
scribed surfaces and the tail and ailerons have a
corrugated texture. Kit includes decals for U.S. VF-9M,
1934 National Air Races and U.S. 3rd Section Leader,
VB-2. 71/2" wingspan when assembled. |
|
$29.95 |
Curtiss BF2C-1 1/48 Plastic
Model Kit
Build your
own version of this last U.S. Navy Hawk, the classic
fighter-bomber from the mid-1930s. Highly detailed,
injection-molded plastic kit includes resin crankcase
and separate cylinders, partially open cockpit, and
metal landing gear struts. Designed for the experienced
builder and features U.S. Navy Markings for VB-5B
"USS Ranger." |
|
Sorry
Out of Stock
$29.95 |
Curtiss F11C-2/BFC-2
Hawk 1/48 Scale Plastic Model Kit
The
Curtiss F11C/BFC-2 Goshawk served the U.S. Navy as
a fighter-bomber in the mid to late 1930s. Highly
detailed plastic and resin kit features realistic
surfaces, accurately molded radial engine, and optional
parts and markings for either the F11C-2 or the BFC-2
variant. 81 pieces; assembly required. |
|
$29.95 |
Boeing P-12E 1/48 Scale
Plastic Model Kit
Highly
detailed plastic and resin kit of this great between
the wars fighter that was used by both the Army and
Navy (as the F4B). The P-12E was a late variant and
had an all-metal fuselage with fabric-covered wood
wings. Kit features delicately scribed surfaces, and
the tail and ailerons have an authentic corrugated
texture. Includes choice of markings. Approx. 71/2"
wingspan; assembly required. |
| |
|
|
|
|
|
$19.95 |
JU 52 Civilian 1/72 Plastic
Model Kit
Just as the
Ford Tri-Motor was a mainstay of U.S. domestic air
travel in the 1930s, so too the Junkers Tri-Motor
was a leader in Europe with nearly 5,000 built for
passenger and cargo service. This plastic kit features
the markings of the German airline, Lufthansa. 10
1/4" long. Assembly required, 151 pieces. |
|
$14.95 |
Curtiss Condor 1/81 Scale
Plastic Model Kit
The Condor had several advanced developments making
it the first "modern airliner" - boasting the first
electronically-operated retractable landing gear in
a transport and a comfortable soundproof cabin. Detailed
plastic kit includes rippled biplane wings and parts
to build wheeled, skied or amphibious versions. Choice
of 5 different markings, including Byrd Antarctic
Expedition II or American Airways. Assembly required;
111/2" wingspan when completed. |
| |
|
|
|
|
|
Sorry
Out of Stock
$18.95 |
Boeing 247 1/72 Plastic
Model Kit
Forerunner
of today's transports, the 247 incorporated such advanced
features as all-metal construction, retractable landing
gear, de-icers and controllable pitch propellers.
Plastic kit includes parts and decals for finishing
as an airliner, or as Roscoe Turner's racer. Assembly
required. |
|
Sorry
Out of Stock
$26.95 |
Lockheed Electra L-10
1/53 Plastic Model Kit
Plastic
kit includes all parts and decals for construction
as Amelia Earhart's around-the-world plane, or as
a U.S. Navy or Coast Guard command transport. Assembly
required, 12" wingspan when complete.. |
| |
|
|
|
|
|
$19.95 |
Junkers Ju 86 1/72 Plastic
Model Kit - Lufthansa
Developed
in the mid-'30s by the newly conceived German Airplane
Industry, the Ju-86 - used in civil service for both
passenger and airmail transport - introduced a number
of new elements, such as the use of diesel engines.
Plastic kit features engraved and raised panel lines,
detailed cockpit, and two engines with 3-bladed propellers.
Includes choice of markings. 121/2" wingspan;
assembly required. |
|
$19.95 |
B-314 Clipper 1/144 Scale
Plastic Model Kit - Pan Am
Build
your own version of the largest flying boat from the
Golden Age of travel with this highly detailed plastic
kit. Featuring recessed panel lines and intricate
engine assemblies with 3-bladed propellers, your kit
includes Pan Am markings, a display base and 78 pieces.
121/2" wingspan; assembly required. |
| |
|
|
|
|
|
Sorry
Out of Stock
$49.95 |
Sikorsky S-43/JRS-1 1/72
Plastic Model Kit
This
Sikorsky model was developed in 1935 for Pan American
as an airliner for its Latin American routes. Also
used by the U.S. military, the Navy designated the
S-43 as the JRS-1. Highly detailed plastic kit features
recessed panel lines, realistic engines, and an authentic
undercarriage with landing floats. Includes resin
detail pieces, choice of markings for the U.S. Navy
or U.S. Marines and 161 pieces. 141/4" wingspan;
assembly required. |
|
Sorry
Out of Stock
$19.95 |
Curtiss Sparrowhawk 1/32
Plastic Model Kit
The
U.S. Navy's miniscule Sparrowhawks operated from dirigibles
during the 1930s, and were among the most colorful
fighters of the era. Utilized primarily in conjunction
with the U.S.S. Akron and U.S.S. Macon airships, the
Sparrowhawks also operated briefly from the airplane
carrier U.S.S. Lexington. Plastic kit includes two
types of wheels, monofilament rigging, detailed interior,
and decals for six different Sparrowhawks. 91/2"
wingspan when complete. |
| |
|
|
|
|
|
Sorry
Out of Stock
$13.95 |
LZ-130 Graf Zeppelin
II Plastic Model Kit
Highly detailed plastic kit of this famed German rigid
airship. Features fine structural details on external
skin, pilot's compartment, four Daimler-Benz engines,
tractor propeller and realistic rudder surfaces. Includes
landing tower, display stand and 100+ pieces. Measures
133/4" in length; assembly required. |
|
Sorry
Out of Stock
$13.95 |
LZ-129 Hindenburg 1/720
Plastic Model Kit
1/720
Scale Model Kit of the Hindenburg Plastic kit requires
assembly. 133/4" when complete; skill level 3. |
| |
|
|
|
|
|
$7.95 |
Ryan PT-20 1/48 Plastic
Model Kit
The PT-20
first flew in 1934 and quickly became one of the U.S.
military's primary trainers. Typical of Golden Age
airplane, the PT-20 sports an open, tandem cockpit
and wheel spats. Detailed plastic kit features raised
panel lines and choice of landing gear or floats for
included water display base. Includes two pilot figures,
choice of markings and 37 pieces. 71/2" wingspan;
assembly required. |
|
$7.95 |
Spirit of St. Louis 1/72
Plastic Model Kit
Build
your own version of Charles Lindbergh's famous plane.
Plastic kit has a 71/2" wingspan and requires
assembly. |
| |
|
|
|
|
|
$21.95 |
Polikarpov I-16 1/48
Plastic Model Kit
The
I-16 was introduced in 1933 and was immediately recognized
for its surprising agility and performance. Highly
detailed plastic kit features fully engraved panel
lines and rivet details, authentic engine assembly,
realistic cockpit and landing gear. Includes wing-mounted
machine guns and several small bombs as well as choice
of markings. 71/2" wingspan; assembly required. |
|
$21.95 |
P-26C Peashooter 1/48
Plastic Model Kit
The
Peashooter was the first all-metal, low-wing fighter
put into production by the U.S. Army. Authentic plastic
kit features engraved panel lines, highly detailed
cockpit, a realistic radial engine and optional parts
to build either the "A" or "C"
version. A variety of bombs are also included. Choice
of markings, 71/2" wingspan when complete. Assembly
required. |
| |
|
|
|
|
|
$21.95 |
Polikarpov I16 Type 18
1/48 Plastic Model Kit
When the tiny I-16 flew for the first time in 1933,
it was far ahead of any other fighter design in the
world, featuring retractable landing gear, a cantilever
wing, a variable pitch propeller, and a 20mm cannon
that was the most powerful airplane weapon in frontline
service with any nation. This plastic kit of the I-16
Type 18 features recessed panel lines; detailed cockpit
and landing gear; full armament package; and markings
from Murmansk, 1941. 71/2" wingspan; assembly required. |
|
$21.95 |
P-36A Hawk 1/48 Plastic
Model Kit
Plastic kit
features fully engraved panel lines and details as
well as highly detailed cockpit interior, landing
gear bay and armaments. Includes decals for either
P-36A or Hawk 75A-1 markings. Assembly required, 91/4"
wingspan when complete. |
| |
|
|
|
|
|
$22.95 |
Seversky P-35A 1/48 Plastic
Model Kit
Plastic kit
of this pre-WWII fighter features fully engraved panel
lines and details, highly detailed cockpit interior,
landing gear bay and armaments, and high quality decals.
Wingspan is approximately 9" when completed;
assembly required. |
|
Sorry
Out of Stock
$19.95 |
Seversky P-35/S2 1/32
Plastic Model Kit
Designed
during the 1930s, the Seversky P-35 was considered
one of the most progressive pursuit planes in the
U.S. Army Air Corps, and was a forerunner of the famous
P-47 Thunderbolt. Modified Severskys also competed
in the Bendix and Thompson Trophy races. Plastic kit
features detailed interior, choice of canopies, two
types of wheels, and optional parts and decals to
build either the military or civilian racing airplane.
Assembly required; 131/2" wingspan when complete. |
| |
|
|
|
|
|
$39.95 |
Curtiss A-8 Shrike 1/48
Plastic Model Kit
During
the late 1920s, the USAAC initiated an effort to improve
its ground attack capabilities. Curtiss responded
with the XA-8, a single engine, two-seat, all metal
monoplane armed with bombs and machine guns, which
in production became the A-8 Shrike. Plastic kit features
engraved panel lines and a fully detailed cockpit
with floor, sidewalls, instrument panels, seats, bulkheads
and more. Includes resin detail parts and choice of
markings. Assembly required. |
|
$29.95 |
PZL-11C 1/48 Plastic
Model Kit
This mid-1930s
Polish fighter served until it was outperformed by
Messerschmitt Bf 109s when the Nazis invaded Poland
- although the stout fighter did achieve 120 confirmed
kills. Plastic kit features details including the
corrugated-look wing, engraved panel lines, accurate
control surfaces, detailed gun troughs and more. Includes
parts for choice of three variants, resin and photo-etched
detail parts, choice of markings and 93 pieces. 83/4"
wingspan; assembly required. |
| |
|
|
|
|
|
$27.95 |
Grumman F3F-1 1/48 Scale
Plastic Model Kit
These
nimble little barrel-shaped fighters flew in the late
'30s as frontline airplane before being relegated
to training duties as the war grew closer. Highly
detailed plastic kit features recessed panel lines;
delicate surface details; pre-formed photo-etched
stainless steel rigging; and realistic engine, landing
gear and interior. Includes choice of markings and
over 75 pieces. 8" wingspan; assembly required. |
|
Sorry
Out of Stock
$22.95 |
Brewster F2A2 Buffalo
1/48 Plastic Model Kit
Plastic
kit features highly detailed cockpit with instrument
panel, 3-piece ejection seat, side stick control and
seated pilot figure. Detailed wheel wells, landing
gear, and much more allow you to bring this U.S. Navy
fighter to life! 50 pieces, 81/2" wingspan when
complete. |
| |
|
|
|
|
|
Sorry
Out of Stock
$13.95 |
Fairy Swordfish 1/72
Plastic Model Kit
Although
considered to be antiquated in design even before
WWII, Swordfish airplane served the Royal Navy from
1936 to 1945 - and were vital to the attacks on Taranto
and the Bismarck. Because of its exceptionally stable
handling characteristics it was a very popular airplane
with crews and was affectionately known as the 'Stringbag'.
Detailed plastic kit includes choice of markings and
has a 71/4" wingspan when completed. |
|
$27.95 |
Gladiator Mk.I 1/48 Plastic
Model Kit
This last
of the British bi-plane fighters was known for its
maneuverability but was quickly outperformed by the
innovative monoplanes in production at the same time.
Highly detailed plastic kit features textured surfaces,
intricate engine assembly and authentic-look landing
gear. Includes choice of markings and 95 pieces. 51ç4"
wingspan; assembly required. |
| |
|
|
|
|
|
$24.95 |
XF5F-1 Skyrocket 1/48
Plastic Model Kit
A
perfect companion to Naval Fighter Series Volume 31
on the Skyrocket, this is a fully detailed plastic
kit of the Navy's early twin-engine fighter test bed.
Plastic kit can be built as the early version without
armament or as the later version with armament attached.
Detailed cockpit includes a seat, stick, rudder pedals,
and instrument panel. Nose guns and wing fillets for
armed version. Armament doors can be positioned opened
or closed but should be closed for unarmed version.
Engine parts include an ignition harness, hub, cylinders,
intake collector, gearbox, and exhaust collector.
Also includes vertical and horizontal stabilizers
that vary between the early and late versions. 101/2"
wingspan when complete. |
|
Sorry
Out of Stock
$18.95 |
Martin B-10B 1/72 Plastic
Model Kit
The B-10B,
operational from approximately 1934-1942, was a forerunner
of the advanced WWII bombers. Plastic kit features
choice of squadron markings, external bomb rack and
bomb, and three position choices for landing gear
installation. Assembly required. |
